A2L REFRIGERANT CONSIDERATIONS A2L refrigerants have been on the radar of the commercial refrigeration industry as promising alternatives to high global warming potential (GWP) hydrofluorocarbon (HFC) refrigerants. With a GWP of less than 300 and in some cases even below 150, some refrigerants [...]
Read MoreClosed Systems - Passive Systems and Active Systems CoolingMost industrial processes that generate heat use water to keep the temperature at a suitable level. As long as the temperature is kept under control throughout the year, the company's production will not stop. This heat, we can keep it within [...]
Read MoreChiller for Tequila Filtration - Case 2 I am Jorge Machain and in this article, I will tell you about the project we did for a tequila producer. Our client in Arandas, Jalisco, wanted to have a twin system to the filtration system he already had. The volume of [...]
Read MoreChiller for Tequila Filtration - Case 1 I am Jorge Machain and in this article, I will tell you a little about the filtration process in the production of tequila. In the tequila manufacturing process there is a step that guarantees the clarity of the product. This process is the filtration process [...]
Read MoreMax Madrid, this time I am going to tell you a little about a maintenance we performed on a Chiller equipment Brand: York Model: YLAA0125HE46XFBSTX The equipment before maintenance: The condenser was dirty. Water pipe filter was disassembled and cleaned. [...]
Read MoreThe Importance of Performing Preventive Maintenance on a Chiller Correct preventive maintenance is the key to prevent malfunctions in chilled water generating units, considerably reducing corrective maintenance. Preventive maintenance performed properly allows detecting constant or repetitive failures, decreasing the probability of poor operation and increasing the efficiency of [...]
Read MoreExpos 2022 Expos 2021
Read MoreOrange Juice Chillers
Read MoreCooling for presses, dies and hot stamping line. Replacement of 8 Cooling Towers by 5 Dry Cooler, capacity 200 Tons each Cooling of presses and dies In this project, the purpose was to lower the operating costs of the existing equipment, saving energy and lowering the [...]
Read More